Now in larger 2' x 4' size!
NOW in LARGE Panels
Fantastic SoundTrax™ by Next Acoustics™
But sometimes you don't need a full box of 96 s.f. of 2" SoundTrax panels, so here's our "half-pack"! That's 8 2'x4' panels in a box (64 s.f.). PRO Studio Quality!!! Color is charcoal gray.
You'll enjoy a great performing product, but you won't bust your budget to get it! Regular WebPrice is $179 plus shipping. The key to SoundTrax getting the job done is the peaks and valleys (and angles and depths and curves and...well you get the idea) that offer great absorption of the unwanted reflections. All that exposed area on each panel actually helps with the redirection of sound as well. A little of this treatment goes along way!
We think you might
want a little Q & A:
Q: So just what is the difference between your regular 2" SoundTrax panels and these 2" SoundTraxLG panels?
A: The ONLY difference is the size of each panel. Our regular SoundTrax are 12" x 24" (2sqft) vs 24" x 48" (8sf) for the SoundTraxLG panels. The color, fire-rating, and performance (NRC = .75) are the same
Q: Can I mix and match the 12" x 24" panels with the LARGER 24" x 48" panels?
A: YES...create a cool design with the two panel sizes. But be aware, you should NOT expect the pattern of SoundTrax panels of either size to match up with one another. Check out our FrameTrax strips if you want to hide such seams.
Q: Can I cut the SoundTrax panels to fit or decorate my specific room?
A: YES, all of our foam products can be cut to fit your room and your wishes. HOW? The best way is with a common electric kitchen knife and a steady hand!
Q: WHY would I buy the Larger 2' x 4' panels vs. the smaller 2' x 1' panels?
A: 1. Ease of installation...if you are doing a larger space requiring quite a bit of coverage, it is easier and faster to hang the 2' x 4's vs. the 2' x 1's. 2. Decorative: larger panels mean less SEAMS and thus a cleaner, professional look if you are going to have treated areas that are at least 2' x 4' (old industry standard)
Q: Is there any advantage to using the smaller 2' x 1' SoundTrax Panels?
A: YES: 1. In general, spreading out your absorptive panels will give you better acoustic performance, especially in smaller spaces and when you are NOT going to have a larger % of your walls and/or ceilings covered with tiles. 2. Shipping costs will generally be around 10% less expensive when buying our regular 2' x 1' SoundTrax in 24 sq. ft. (1 box) quantities. WHY...the screwy way UPS and Fedex charge for larger, lightweight boxes. AND 3. YOU want a quantity smaller than 96 square feet...see our other product options for 12, 16, 24, and 48 sq. ft. options. and 4. the SoundTraxLG come in a LARGE box that is 48' x 24" x 16" and may not be very transportable for you!
Q: What's up with the Shipping Charges?
A: Our average cost to ship the larger box is close to $60. We offer the foam at half the price of other leading suppliers and with the shipping included, we are still 40 to 60% less than quality competition. P.S.: If foam from others comes "shrink-wrapped," beware...the performance and aesthetics has already been compromised.
Q: Why are your Prices so low?
A: We sell DIRECT to you...NO middle-man (Guitar Ctr., etc.). Other "cheap Charlies" do it by using inferior foam and all kinds of false claims they can't substantiate. We use fire-rated foam that exceeds the specifications of the products offered by others (such as Auralex), and each lot of our foam is tested to meet fire and performance standards.
Q: What if I am not sure what I need or where to install it?
A: SIMPLE...JUST ASK US! The best way for you to get the best solution is to take advantage of our RoomTune Free Room Consultation Service...
Q: How do I attach it to the Wall?
A: For larger panels, many prefer to use a liquid (water-based) adhesive like PL200 or the Proper Liquid Nails. You can also use our FoamFast 24 Spray Adhesive. NOTE: 3M Super 77 does not work very well. Also, you can use our NextTape Adhesive Tabs. For 96 sq. ft., we suggest FOUR Packs of ApeTape. and make sure you cut each 2" piece of NextTape into 1" pieces so that you can use 8 - 1" pieces per 2' x 4' panel. You should place the NextTape pieces 6" in from each edge, with 2 pieces (x4) 6", 18", 30", & 42" from the top. Others have suggested cutting the 2" pieces into 4 - 1/2" x 1" pieces so you can use 16 per panel. The wall surface needs to be flat and very clean (and ideally – painted) for the NextTape to work effectively. NextTape is NOT recommended for ceiling treatment/placement.
Q: HOW FAST are you GUYS?
A: SoundTraxLG will ship via UPS within ONE business day of receiving your payment (depending on size of order – lots of boxes may take a few extra days because we like to cut those at the same time to make sure all the color matches)!
BTW….Compare us to 96sf of Auralex Studiofoam – their 2” product is at least $400.00+ plus shipping!!!
Shipping rate(s) are for this product only to the continental United States ONLY. Due to the size of the boxes we CANNOT ship to APO's, Hawaii, Alaska, Puerto Rico or Canada.
Since we can’t ship this product to the areas listed above, we suggest you see our other listings for 2' x 1' SoundTrax…
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in USD.